| PowerHouse IHF Traction charger |
| The PowerHouse IHF traction charger from Crown battery
is suitable for flooded and maintenance free battery. With
a power factor close to 99% and an efficiency of about
92% the PowerHouse IHF Charger is a market leader in
energy efficiency. The PowerHouse IHF charger combine
microprocessor control with well established High
Frequency IGBT technology to provide you with the
highest quality Traction Chargers on the market today.
These units are UL listed and capable of providing a ripple
free charging current that improves the energy transfer
from the charger to the battery. This prevents battery
overheating during charging thus ensuring a longer
battery life. They can be provided for nominal charging
voltages from 24 VDC to 80 VDC. Equipped with a
colored display showing the battery charging status, the
PowerHouse IHF charger provides easy to use features
and state of the art operational capabilities.
| 
 |
| Key Features |
Microprocessor Controls , 14 pre programmed charging curves
including a USB communication port using windowsTM based
service software for easy operation maintenance and statistics.
The service software compiles statistics data in separate hard drive
such as Charges cycles , forced switch over, excess charging , I/U
errors and low level electrolyte.
Reduced volume and weight by a factor of 5.
Provided with an optional BATCOM radio communication transmitter
when installed on the battery, provides remote signals to the
corresponding charger such as over-temperature, low electrolyte
and battery capacity.
Designed for 15 years or 30 000 operating hours.
Blue led indicator on front panel for low electrolyte level alarm.
Large colored charge status light.
Optional Pilot contact controlled switch off.
Relay control for electrolyte circulation / automatic water topping.
|
Technical Specifications
|
Input
Voltage : 207—288 VAC single phase
480 Vac three phase
Input Voltage Tolerance: +10%, -15%
Input Frequency: 50 or 60 Hz
Input Frequency Tolerance: ±5%
Efficiency: 92% depending on input voltage
Input Power Factor: ~ 0.99
Humidity: 0 to 95% non-condensing
Altitude: 3300 ft (1000 m)
CSA 107.2
| Output
Voltage:24, 36, 48, 80 VDC
Current: 40 to 330 A
|
Standards
NEMA Compliant
UL 1564 (pending)
ANSI C84.1
CSA 107.2 |
| Standard Models |
| VAC in | AC phase | Battery voltage (V) | Battery capacity (Ah) | Charging current (A) | Cabinet type | Crown Model Number |
| 208 - 277 | 1 | 24 | 255 | 40 | A | CR12HF1-40 |
| 208 - 277 | 1 | 24 | 450 | 70 | A | CR12HF1-70 |
| 208 - 277 | 1 | 24 | 510 | 85 | A | CR12HF1-85 |
| 208 - 277 | 1 | 24 | 600 | 100 | A | CR12HF1-100 |
| 208 - 277 | 1 | 24 | 750 | 120 | A | CR12HF1-120 |
| 480 | 3 | 24 | 865 | 140 | B | CR12HF3-140 |
| 480 | 3 | 24 | 965 | 150 | B | CR12HF3-150 |
| 480 | 3 | 24 | 1050 | 170 | B | CR12HF3-170 |
| 480 | 3 | 36 | 510 | 85 | B | CR18HF3-85 |
| 480 | 3 | 36 | 600 | 100 | B | CR18HF3-100 |
| 480 | 3 | 36 | 750 | 120 | B | CR18HF3-120 |
| 480 | 3 | 36 | 865 | 140 | B | CR18HF3-140 |
| 480 | 3 | 36 | 965 | 150 | B | CR18HF3-150 |
| 480 | 3 | 36 | 1050 | 170 | C | CR18HF3-170 |
| 480 | 3 | 36 | 1200 | 200 | C | CR18HF3-200 |
| 480 | 3 | 36 | 1360 | 220 | C | CR18HF3-220 |
| 480 | 3 | 36 | 1450 | 240 | C | CR18HF3-240 |
| 480 | 3 | 36 | 1600 | 260 | C | CR18HF3-260 |
| 480 | 3 | 36 | 1750 | 290 | C | CR18HF3-290 |
| 480 | 3 | 36 | 1980 | 330 | C | CR18HF3-330 |
| 480 | 3 | 48 | 510 | 85 | B | CR24HF3-85 |
| 480 | 3 | 48 | 600 | 100 | B | CR24HF3-100 |
| 480 | 3 | 48 | 750 | 120 | B | CR24HF3-120 |
| 480 | 3 | 48 | 865 | 140 | C | CR24HF3-140 |
480 | 3 | 48 | 965 | 150 | C | CR24HF3-150 |
480 | 3 | 48 | 1050 | 170 | C | CR24HF3-170 |
480 | 3 | 48 | 1360 | 220 | C | CR24HF3-220 |
480 | 3 | 80 | 600 | 100 | C | CR40HF3-100 |
480 | 3 | 80 | 600 | 150 | C | CR40HF3-100 |
|
| Cabinet type | Size (inch) | Weight (lb) |
| A | 16x20x11 | 33 |
| B | 16x20x11 | 66 |
| C | 22x31x16 | 154 |
|
